Tools
1/2" MNPT, G-Style Plug, Triflate/Parker Interchange, Made Of Case Hardened Steel, Plated To Prevent Rust, Maximum Pressure 300 PSI, Maximum Temperature 250 Degrees Fahrenheit, Air Flow 99 SCFM @ 100 PSI.
2 Pack, 1/4" MNPT x 1/4" NPS Hex Nipple Hose Fitting, 1/4" MNPT Hex Nipples Are Brass Hose Fittings That Are Used To Assemble New Hoses Or Replace Old Fittings On Hoses, 1/4" Male NPT x 1/4" NPS Ball Socket, Includes: 1/4" Male National Pipe Thread One End & 1/4" National Pipe Straight Other End.
2 Pack, 3/8" MNPT x 1/4" FNPT, Reducer Bushing, Hose Fitting, Used To Assemble New Hoses Or Replace Old Fittings On Hoses When Reduction In Pipe Size Is Required, Made Of Corrosion Resistant Brass, Durable & Flexible Air Hose Fitting, 3/8" Male x 1/4" Female National Pipe Thread, Reducer Bushing Are Designed To Accommodate 3/8" MNPT & 1/4" FNPT, Quickly Repair Or Add New Air Hose Lines When Needed.
2 Pack, 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting, 1/2" Male x 3/8" Female National Pipe Thread, Brass Reducer Bushing, Replaces Old Fittings.
Air Hose Swivel Connector, 1/4" Male & Female NPT Ends, Swivels 360 Degree In 2 Places Prevents Hose Kinking & Keeps The Hose Out Of The Way,150 PSI Maximum Inlet Pressure, Aluminum Body, Female Pipe Threads Connect To Most Hose Fittings & Adapters, Not For Use With Percussion Tools.
3-In-1 Air Manifolds, Lightweight, Aluminum Body, Supply 3 Air Tools From A Single Outlet, No Need To Disconnect & Connect For Every Tool Change, 3/8" Inlet NPT Female x 1/4" (3) Outlets NPT Female, Maximum Working Pressure Of 300 PSI.
4 Pack, 1/4" FNPT M Style Coupler, Use For Connecting Air Tools To An Air Hose Or Any Pneumatic System Components, With Corrosion Resisted Plated Brass & BUNA-N Seal, Connection 1/4" FNPT & M Style Plug, Couplers Designed To Accommodate Multiple Pneumatic Systems & Tools, Plated & Coated With Corrosion Resistant Increases Servicing Life, Sleeve Guards Help Reduce The Potential Of Accidental Disconnects & Protects The Coupler Sleeves, Includes: 4 Female M Style Couplers.
5 Pack, 1/4" MNPT M Style Plug, 1/4" Male National Pipe Thread, Maximum Inlet Pressure Of 300 LB Per SQIN, 40 Standard CUFT Per Minute, Maximum Temperature Of 250 Degrees Fahrenheit, Complies With Military Specifications MIL-C-4109.
Pro25, Stud Sensor With Picture Hanging Kit, Stud Scan Mode Locates Edges Of Wood & Metal Studs Up To 3/4" 19 mm Deep, Ready Light Indicates When Calibration Is Complete & Tool Is Ready For Use, Edge Arrow Illuminates When Edge Of Stud Is Located, Zircon's Patented Over Stud Feature Alerts If Scan Begins Over Stud, Spotlight Pointer Shines An Arrow Shaped Image On Scanned Surface To Clearly Indicate Edge Of Stud, "V" Marker Groove Enables Accurate Marking Of Stud Edge Location, Ergonomic Grip For Secure Hold In Either Hand At Any Angle, Uses 9V Battery Not Included.
Pro45, Stud Scan Sensor, Mode Locates Edges Of Wood & Metal Studs Up To 3/4" 19 mm Deep, Deep Scan Mode Doubles Scanning Depth To 1-1/2" 38 mm Deep, Ready Light Indicates When Calibration Is Complete & Tool Is Ready For Use, Edge Arrow Lights Up Sequentially As Tool Approaches Stud & Fully Illuminates When Stud Edge Is Located, Zircon's Patented Over Stud Feature Alerts If Scan Begins Over Stud, Wire Warning Detection Indicates Presence Of Live, Unshielded AC Electrical Wiring Up To 2" 50 mm Deep, Spotlight Pointer Shines An Arrow Shaped Image On Scanned Surface To Clearly Indicate Edge Of Stud, "V" Marker Groove Enables Accurate Marking Of Stud Edge Location, Ergonomic Grip For Secure Hold In Either Hand, Uses 9V Battery, Not Included.
Kreg, Pocket Hole Jig Expansion Pack, Expands The Capability Of Pocket Hole Jig 310 Or 320 By Adding Another Drill Guide To Drill More Holes, Plus A Spacer That Fits Between The Guides For More Hole Spacing Options, Includes 1 Hardened Steel Drill Guide With Thickness Stops For 1/2", 3/4", 1-1/2", Add A Second Guide To The Pocket Hole Jig 310, Or Add A Third To The Pocket Hole Jig 320, Kit Also Includes A Pocket Hole Jig Spacer That Provides More Pocket Hole Spacing Options By Positioning The Spacer Then Twisting The Drill Guides To Lock Them In, Lifetime Warranty.
Kreg, Pocket Hole Jig 310, Features A Hardened Steel Drill Guide & Thickness Stops For 1/2", 3/4", 1-1/2", Material Gives The Versatility Needed To Build With Boards & Plywood Found In Home Centers, Material Thickness Gauge & Easy Set Drill Bit Make Setup Simple, Anti Slip Base Holds The Jig Precisely In Position, Durable Construction & A Lifetime Drill Guide Warranty.
Kreg, Pocket Hole Jig 320, Features Two Drill Guides, A Removable Spacer & Thickness Stops For 1/2", 3/4" & 1-1/2", Material Gives The Versatility Needed To Build With Boards & Plywood Found In Home Centers, Material Thickness Gauge & Easy Set Drill Bit Make Setup Simple, Clamp Adapter & Anti Slip Base Hold The Jig Precisely In Position, All Components Store In A Durable, Compact Case That Even Has Space To Store Pocket-Hole Screws, 40 Sample Screws Included.
Kreg 125PK 2-1/2" #8 Blue-Kote Pocket-Hole Screws. These screws feature 3 anti-corrosion layers and provide rust resistance up to 400% greater than zinc plated screws. They are also compatible with pressure treated material.
1/2" Shank, Easy Set Drill Bit, Stop Collar & Material Thickness Gauge Hex Wrench, Compatible With All Kreg Pocket Jigs.